Water reuse: cutting the site’s withdrawals
Reusing treated wastewater reduces withdrawals from the environment and secures supply during droughts. In industry, uses range from washing and cooling to process water, depending on the quality level achieved.
Treatment routes
- Membrane bioreactor: biological treatment and ultrafiltration in one step, giving clear water of good quality.
- Ultrafiltration and reverse osmosis: retain salts and micropollutants for water close to fresh-water quality.
- Disinfection: UV, chlorine or ozone, controlling legionella risk in cooling circuits.
- Advanced oxidation and activated carbon for organic micropollutants.
Regulatory framework
Regulation (EU) 2020/741 sets minimum requirements for water reuse in agriculture. In France, the decree of 29 August 2023 widened and simplified permitted uses of treated wastewater, and the 2023 water plan targets a 10 % cut in withdrawals by 2030. The revised Industrial Emissions Directive strengthens water performance requirements in best-available-techniques conclusions.
Points of attention
- Concentrate: reverse osmosis produces a saline reject to manage or recover, see residue recovery.
- Micropollutants: PFAS do not degrade, and removing them needs dedicated routes described in PFAS treatment.
- Energy: membranes consume electricity, to be integrated in the energy management system.
- Quality: online monitoring and health-control plans.
Start with a site water balance, spot flows reusable in cascade without heavy treatment, then size the route on real quality needs. Rely on ISO 14001 to manage indicators. A plant can, for instance, reuse final rinse water as first-wash water, then treated water as cooling-tower make-up, often cutting withdrawals by 20 to 40 % before considering reverse osmosis.
Monitoring and risk management
Define quality parameters for each use, install online sensors for conductivity, turbidity and residual disinfectant, and write a response plan for out-of-specification water. Document the approach for authorities and customers, since health and product-quality risks are the main reasons reuse projects stall.
Key takeaway: water reuse is rarely one technology but a chain of small decisions, from segregating streams to monitoring quality. Sites that start with a clear water balance usually find the cheapest savings in the first months.
Going further
- PFAS treatment in liquid effluents
PFAS in industrial effluents: 2026 regulation, activated carbon, resins, membranes, destruction technologies and selection criteria.
- Recovery of industrial residues and sludge
Anaerobic digestion, phosphorus recovery, activated-carbon reactivation, brine recovery and heat: the waste hierarchy in industry.
- ISO 14001 and control of industrial discharges
Environmental management systems, permit compliance, best available techniques, self-monitoring and discharge indicators.
- Environmental processes
Industrial water and effluent treatment, PFAS, water reuse and residue recovery to reduce environmental impact.