GtProcess

Energy storage: choose by duration and service delivered

Storage is sized by its power (MW) and its energy (MWh), hence by its discharge duration. The right choice depends on the service sought: backup, peak shaving, price arbitrage, flexibility or self-consumption of renewable output.

Updated on

Technology overview

  • Lithium-ion LFP: the reference for one to four hours, round-trip efficiency around 85 to 90 %.
  • Sodium-ion: maturing, with no lithium or cobalt, of interest to sites sensitive to material cost.
  • Flow batteries (vanadium): decouple power and energy, suited to longer durations.
  • Thermal: the cheapest per kWh when the need is heat, see thermal storage.
  • Hydrogen: seasonal but with low overall efficiency, around 30 to 40 %, see low-carbon hydrogen.

Services and value

One storage unit can stack several revenues: reduced contracted power, participation in grid reserves (FCR, aFRR), arbitrage and backup. Stacking improves profitability but needs a control system able to arbitrate in real time, which industrial AI and predictive control can assist.

Safety, regulation and connection

Before investing, simulate several years of load and price profiles and include capacity degradation in the profitability calculation, to confirm that storage improves your energy balance.

  • Fire safety and thermal runaway fall under IEC 62933 and NFPA 855 and insurer requirements.
  • The EU Batteries Regulation (2023/1542) requires, among other things, a digital battery passport and recycling obligations.
  • Connection and power conversion are a large share of total cost.

Frequent mistakes

A prior audit of load curves avoids most of these pitfalls.

  • Sizing on power without checking energy available at critical hours.
  • Ignoring capacity degradation and replacement cost.
  • Underestimating footprint, ventilation and safety distances.
  • Neglecting the connection contract and market participation rules.

Key takeaway: storage is a service, not a product. Define the service and the value of each hour of flexibility first; the technology, size and duration then follow naturally from that analysis. Revisit the choice every few years, since battery costs, market rules and your own load profile will all keep changing, and an oversized or poorly matched system quickly loses its advantage.

Going further