SiC and GaN: gaining efficiency and compactness
Wide-bandgap semiconductors, silicon carbide (SiC) and gallium nitride (GaN), withstand higher voltages, temperatures and switching frequencies than silicon. They cut converter losses and shrink passive components and heatsinks.
Two complementary technologies
- SiC (MOSFET): from 650 V to over 3 kV, suited to inverters, chargers, high-power converters and rail traction.
- GaN (HEMT): mainly up to 650 V, very high frequencies, ideal for compact power supplies and DC/DC converters.
- Silicon (IGBT): still competitive and economical for many high-power industrial applications.
Benefits and constraints
Converter efficiency can exceed 98 to 99 %, with losses cut by half or more versus silicon depending on the case. The trade-off is a higher component cost, very fast switching that generates electromagnetic disturbance, and tighter demands on gate drive and wiring. Total cost of ownership should include energy saved, simpler cooling and reduced volume.
Selection guide
Typical applications are electrolyser power supplies, battery storage, variable-speed drives and renewable connection. Better efficiency also reduces heat to be removed.
- Define voltage, current, frequency, load profile and ambient temperature.
- Compare losses over the real duty cycle, not just at rated point.
- Check electromagnetic compatibility and power quality constraints.
- Analyse reliability and cooling over lifetime.
- Validate the supply plan.
Market trends
Rising production capacity, with the move to larger SiC wafers, is gradually lowering component prices. Manufacturers offer modules integrating gate drive, and GaN is extending to higher voltages. Follow these changes before freezing an architecture for several years.
Design precautions
Fast switching edges demand low-inductance layouts, careful gate-drive design with negative turn-off voltage where needed, and shielding against interference. Test prototypes for electromagnetic emissions early, and validate protection against short circuits, since wide-bandgap devices tolerate them for shorter times than silicon IGBTs.
Key takeaway: wide-bandgap devices pay back where efficiency, size or frequency matter most. Evaluate them on the full duty cycle and total cost of ownership, and keep silicon where it remains the simpler and cheaper choice.
Going further
- Power supply for electrolysers
Thyristor or IGBT rectifiers, ripple, harmonics, dynamics and grid connection of industrial electrolysers on renewable power.
- Reliability and cooling of power converters
Thermal cycling, capacitor life, air and liquid cooling, condition monitoring and life-cycle cost for power converters.
- Electrical power quality in industry
Harmonics, flicker, voltage dips and unbalance: EN 50160 and IEC 61000 standards, filtering and measurement for industrial sites.
- Electrical energy conversion devices
Power electronics, inverters, DC/DC converters, silicon carbide and gallium nitride for electrical energy conversion.